
Three quotes sit on your table. One names BWR plywood with acrylic shutters, the second says marine plywood with laminate, the third says HDHMR with a PU coat. All three are for the same kitchen, and none of them tells you which board is going under the sink.
That's the gap most material lists leave open. A kitchen rarely fails because someone picked the wrong brand. It fails because a dry-zone board ended up in a wet-zone cabinet, or because a good board was cut for the sink and the raw edge was left unsealed.
This guide works in the reverse order of a showroom. It starts with the parts of a kitchen, then matches each material to the zone it belongs in, with the Indian Standard grade to ask for, the checks to run when the panels arrive, and the cost bands a Chennai homeowner should expect.
Modular Kitchen Materials at a Glance
A Chennai homeowner stands in a showroom, taps a glossy shutter, and asks what it's made of. The answer is usually a brand name and a finish, which says nothing about what happens when a pipe drips under the sink for a week.
A modular kitchen is built from five material groups. The carcass is the box that holds the shelves, drawers and hardware. The shutters are the doors and drawer fronts. Hardware covers hinges, channels, lift-ups and handles. The countertop is the working surface. The fifth group is the one people forget and the hardest to fix later: edges and fixing materials, meaning the banding, sealant and adhesive that close every cut edge.
These units are factory-finished and then installed in your home. Because panels are cut, edged and drilled before they arrive, the materials get locked in early. Changing a board after production starts usually means remaking the cabinet.
Indian kitchens changed shape quickly, and the materials had to follow. The 2011 Houselisting and Housing Census counted LPG as the cooking fuel in 29% of households, up from 18% in 2001, and found only 47% of households with their main drinking-water source inside the premises. More gas, more plumbing and more appliances inside one small room is exactly why one board can't serve every cabinet.
Here's the full map, one row per part.
Part | Common material | Where it is used | Durability point |
|---|---|---|---|
Carcass, sink and dishwasher units | BWR or BWP plywood | Wet zones near water | Resists repeated wetting when edges are sealed |
Carcass, dry overhead units | MR plywood, MDF or particle board | Dry storage above counters | Swells if water reaches it |
Shutters, laminate finish | Laminate on MDF or plywood | Everyday doors and drawer fronts | Hides small knocks, but edges need sealing |
Shutters, acrylic finish | Acrylic coat on board | Glossy, showcase look | Shows fingerprints and needs soft cleaning |
Hardware | Hettich, Hafele, Blum or Ebco | Hinges, drawer channels and handles | Load rating and soft-close quality decide wear |
Countertop | Quartz, granite or solid surface | Cooking and prep area | Heat, stain and scratch resistance differ |
Edges and fixing | Edge banding, sealant and adhesive | Cut edges, joints and cut-outs | Keeps moisture out of the core |
Every row is a decision you can put in writing. Before you go further, if the look of the kitchen is what's holding you up, it helps to compare cabinet styles and finishes across full kitchen sets rather than judging from one sample chip under showroom lighting.
One rule applies to every row. Where the unit sits decides the material, not the other way round. A sink base, a dishwasher housing and a wall cabinet that holds spare vessels live in completely different conditions.
So start with one page of your own. List the five parts for your kitchen and mark which units sit in a wet zone: the sink base, the dishwasher housing, anything next to exposed plumbing, and whatever takes the splash from the hob.
Carcass Boards and Zone Choices for Chennai
The carcass is the box that holds the shelves, the drawers and the hardware. You never see it once the shutters are on, and it's the part that decides whether your kitchen survives a leak.
Four boards turn up in most Chennai quotes: plywood, MDF, particle board and HDHMR. They aren't interchangeable, and the difference shows up first at the edges.

Plywood is specified by grade, not by the word waterproof
Plywood is thin layers of wood veneer bonded with adhesive under heat and pressure. The cross-grain construction is why it grips screws and hinge plates year after year. BIS identifies three grades under IS 303, and its guidance on IS 303 plywood grades spells out what each one can take.
MR plywood is moisture resistant. It withstands cold water for a long period and hot water for a limited time, but it fails in boiling water. BWR is boiling-water resistant, taking cold water indefinitely and boiling water for a limited period. BWP is boiling-water proof, the grade built for the sink base and the plumbing zone.
Grade | Full name | Cold water | Boiling water | Best use |
|---|---|---|---|---|
MR | Moisture resistant | Long period | Fails | Dry overhead cabinets |
BWR | Boiling-water resistant | Indefinitely | Limited period | Units beside sinks and dishwashers |
BWP | Boiling-water proof | Indefinitely | Designed for boiling water exposure | Sink and plumbing zones |
The quote test: if a quotation says only "waterproof plywood", it hasn't told you the grade. MR and BWP are both called waterproof in conversation and they behave nothing alike.
What MDF, particle board and HDHMR are actually for
MDF is fine wood fibre pressed with resin into a smooth, grain-free sheet. It takes laminate and paint beautifully, which is why it dominates shutter work, but it swells permanently once water reaches the core. Particle board is wood chips bonded with resin, the cheapest board on the list and the weakest at holding screws. HDHMR is a high-density, high moisture resistant board, denser than MDF with better screw-holding, and it earns a place on dry carcasses when the quote prices it below marine plywood.
Each of these boards is manufactured to its own BIS standard, and each standard carries grades within it. That means "MDF carcass" or "HDHMR throughout" on a quote is only half a specification. Ask the supplier which BIS standard each board is made to and which grade within that standard, then get both written into the material list.
A 2 BHK L-shaped kitchen, zone by zone
Take a typical Chennai 2 BHK with an L-shaped layout. The same board list gets split five ways, and the carcass panels are normally 18 mm thick.
Sink base: BWP plywood with every cut edge sealed, under a quartz top. This is the one unit where standing water is a real possibility rather than a worry.
Hob unit: BWR plywood with a heat-resistant top, plus a chimney sized to pull steam away from the boards above.
Dishwasher housing: BWP plywood and full edge sealing, including the back panel and the inlet cut-out.
Dry wall units: MR plywood or MDF with laminate shutters, which is where a cheaper board earns its keep.
Tall pantry: a plywood carcass with full-extension channels, since a loaded pantry drawer is the heaviest moving thing in the room.
Put the costliest board only where water is credible. BWP costs more than BWR, and BWR costs more than MR, so a kitchen that runs BWP through every cabinet has paid for protection the dry wall units will never use. Coastal humidity doesn't cancel that logic, but it does mean every cut edge gets sealed and wall units get a little ventilation behind them.
Keep the paperwork. BIS describes the BWR test as three cycles of 8 hours in boiling water followed by 16 hours of drying at 65 ± 2°C, after which ply adhesion is tested, as set out in the BIS plywood test documentation. You won't repeat that test at home. You can insist that the grade, thickness, manufacturer and batch details appear on the invoice, which is the same record a factory inspector works from.
For the two wet-zone grades side by side, read BWR vs BWP plywood before you approve anything.
Shutters, Laminates and Finishes Compared
A shutter panel has two lives. The board inside deals with steam, splashes and load, while the finish on the face deals with greasy fingers, turmeric stains and the daily wipe-down. Judging one by the other is the classic mistake: a mirror-gloss surface tells you nothing about the board beneath it. Board quality is read at board level, through uniform thickness, bonding strength, moisture resistance and resistance to warping or splitting. The laminate, acrylic or PU coat on top mainly decides what the visible face looks like and how it wears over the years.
The zone decides the finish as much as taste does. Shutters beside the hob take heat and oil vapour, the ones flanking the sink take splashes and wet hands, and the uppers mostly take fingerprints and dust. Four finishes cover almost every Chennai kitchen conversation, and each has a zone where it earns its keep.

Finish | What it is | Daily wear | Best for |
|---|---|---|---|
Laminate | Decorative sheet pressed onto board | Hides small knocks and wipes clean | Busy family doors, sink-run and breakfast-counter shutters |
Acrylic | High-gloss coat on board | Shows fingerprints and needs a soft cloth | Tall units and showcase shutters away from the hob |
PU coat | Smooth painted finish | Resists stains; a chip needs repainting | Even, painted look on dry-zone doors |
Natural veneer | Real wood grain | Needs sealing and more care | Feature doors away from splash zones |
Glass or aluminium frame | Open or framed display shutter | Collects dust and smudges | Display niches and crockery units |
Laminate is the workhorse: a decorative sheet pressed onto the panel, easy to wipe, forgiving of small scratches, and available in enough wood grains and solids to keep a kitchen from looking like a showroom. It belongs where hands are wet, greasy or frequent, which in practice means the sink run, the breakfast counter and every door a child can reach. Acrylic gives the deep gloss that photographs beautifully and shows every fingerprint within a week, so it earns its place on tall units a step away from the cooktop rather than on the drawer opened twenty times a day. A PU coat delivers a smooth painted surface that resists stains better than expected at a higher price, and a chip needs a painter, not a wipe. Natural veneer brings real grain and warmth, and in a humid city it needs proper sealing and gentler cleaning, which keeps it on feature panels rather than the sink base.
Whichever finish wins, edge banding decides how long it lasts. Banding is the thin strip that seals the cut edge of every panel, a bit like the binding on a book's pages. Water rarely enters through the shutter face. It gets in at the top edge of a base unit, behind a hinge, or around a sink cut-out, and once it reaches the core the panel swells and the band lifts.
Ask for the banding method and the shutter thickness in writing. For main shutter panels, 18 mm is the sane default.
Ten seconds in a showroom tells you more than a catalogue. Rub the sample with a damp cloth and watch whether water sits on the surface or darkens the edge. Then press a fingernail into the cut edge. If it gives, so will the panel.
Get the finish name, brand and shade code onto the approval sheet, so nothing arrives on site that you did not sign off. If you're deciding between the two most common options, this comparison of acrylic vs laminate for a Chennai modular kitchen covers the trade-off in more detail.
Hinges, Hardware and Countertop Choices
A drawer that runs perfectly in the showroom can still become the first annoyance in a finished kitchen. The failure is rarely dramatic: a soft-close hinge loses its hush, a channel starts to grate, a handle loosens at the corner everyone pulls. Specify hardware by zone and workload, not by showroom shine.
Start with the fittings list. Standard hardware is Hettich; Hafele, Blum and Ebco are also used, and hardware customisation is possible. Ask which hinge and channel go into the sink base, which carry the grain-and-oil drawers near the hob, and which shutters get daily, two-handed use. Once those choices are written into the schedule, they should not be substituted without approval.
Three checks settle most hardware decisions.
Load rating: it is printed on the drawer channel packaging. A full-extension soft-close channel that carries the stated load is worth more than a heavier-looking channel with no rating.
Extension and closing: full-extension means the drawer box comes all the way out, so you can reach the back of a deep drawer without kneeling.
Brand warranty: the paperwork names the term and the service route. Keep the packets and the bill, because a warranty claim without an invoice usually goes nowhere.
Countertops get chosen on looks far more often than on behaviour. Match the slab to the work each zone sees. Quartz is engineered and non-porous: stains sit on top, it needs no sealing, and the colour stays consistent from slab to slab. Granite is natural stone that handles a hot pan without drama, but it is porous and wants periodic sealing. Solid surface gives you smooth joints and a repairable finish, and dislikes a hot vessel set down without a trivet. Around the sink, pay attention to cut-outs and standing water; near the hob, to heat and utensil knocks; on the main prep run, to staining and daily wiping.
Height matters as much as material. The counter should suit the people who use the kitchen, so split levels when it helps: keep the sink run slightly higher or lower than the chopping zone, depending on reach, posture and the tasks done most often. A taller cook may want the washing zone raised; a shorter user may find prep easier a little lower.
Note the hardware brand, the drawer load rating, the countertop type and the counter height on the schedule before anything is ordered.
What Each Material Costs per Linear Foot
A linear foot measures the length of cabinet run along the wall, regardless of how deep or tall the unit is. Measure your wall, and you have the unit your quote is priced against.
A 2024 India modular kitchen cost guide published by Biddaro reported material costs per linear foot for the three common boards.
Material | Cost per linear foot | Typical use | Note |
|---|---|---|---|
HDHMR board | ₹8,000 to ₹15,000 | Dry carcasses and shutters | Budget option for dry areas |
Marine plywood | ₹12,000 to ₹22,000 | Sink and wet-zone carcasses | Confirm the BWP grade in writing |
Acrylic-finish plywood | ₹18,000 to ₹35,000 | High-gloss shutters | Price reflects the finish as well as the board |
Marine plywood costs about 1.5 times HDHMR at the low end of both bands, which is the whole argument for zoning: spend it near water, save it in the dry overheads. If you're benchmarking against kitchens built elsewhere, this breakdown of custom cabinet cost per linear foot from Jennifer Gilmer Kitchen & Bath shows how the same unit is priced in another market.
A 2025 India pricing guide from RealCostIQ quoted cabinetry at ₹2,000 to ₹2,800 per square foot for laminate and ₹3,500 to ₹4,200 per square foot for acrylic, excluding GST and based on box, shutter and basic hardware. That's a square foot rate, not a linear foot rate, so don't compare the two numbers directly.
Treat every figure here as an estimate that moves with city, brand and thickness. Ask each quote to show material, hardware and labour as separate lines, and the comparison becomes possible.
How to Check Materials Before Installation
A material list only works if the panels that arrive match it. Run this routine before cutting starts, when a problem is still cheap to fix.
Match the invoice to the schedule. Check grade, thickness and manufacturer on every board line. A missing grade is the first warning sign.
Ask for the test paperwork. For plywood, request BIS conformity or the manufacturer's test documentation, and read the grade on the sheet stamp rather than the bill alone.
Inspect every panel. Reject any board showing swelling, delamination, warped edges or uneven thickness. Once it's cut, that board is your problem.
Check moisture content. IS 303:1989 sets plywood moisture content between 5% and 15% when tested by the referenced method, and BIS product-control guidance provides for reconditioning and retesting when samples fail (IS 303:1989). Ask the supplier for the reading if it isn't on the paperwork.
Store it properly. Panels go flat, raised off the floor, away from wet masonry, until installation day.
Open the hardware packets. Confirm the brand and the load rating against the list rather than trusting the carton label on the outside.
Look at the sink cut-out. It should be sealed with a compatible sealant and edge banding, not left as bare core.
Stop on any difference. If a board doesn't match the approved list, get written approval before it's fitted.
Moisture isn't the only quality question. A board's moisture grade and its formaldehyde story are separate claims, and "waterproof" answers only the first, as this comparison of low-VOC and formaldehyde-safe kitchen materials sets out. Ask for both on paper.
If your scope is still moving, this kitchen remodel scope and budget guide helps you settle what's being built before you settle what it's built from.
These checks cost an hour before fitting. After a carcass has swelled around a slow leak, the same checks cost a cabinet, a countertop cut-out and a week of disruption. Keep the substitution question settled early, and this guide to preventing material substitution in Chennai interiors explains how to hold a supplier to the approved list.
Confirm Your Material List Before You Sign
Turn the list into a signed, one-page material schedule. Each zone gets its carcass grade and thickness, its shutter finish and edge method, its hardware brand and drawer load rating, and its countertop type and height. Attach that page to the quotation and ask for written confirmation against it.

That page is what protects you during production. A verbal assurance about BWP plywood under the sink is worth very little once the shutters are on and the plumber has come and gone.
Interiors by DeX builds modular kitchens in Chennai with branded and verified materials, covering boards, hardware, hinges and channels, and handles and accessories. Materials aren't substituted without your approval, so the schedule you sign stays the schedule that gets built. Every modular kitchen also carries a 15-year modular warranty that includes free replacement in the first five years, which tells you what level of protection to ask for from anyone else.
Send your zone list across before you compare quotes. The materials proposed against each zone will tell you more about the kitchen than the total at the bottom of the page.
A modular kitchen in Chennai deserves a material schedule you can hold someone to, and that's how Interiors by DeX plans every kitchen: each zone mapped to its board grade, shutter finish, hardware and countertop before production begins. If you're weighing up quotes right now, send us your layout and we'll set out what belongs under the sink, beside the hob and in the dry overheads, with the grades and brands named. Visit Interiors by DeX to see the boards, finishes and hardware in person before you decide.